Product Name:
Single Roller Cone Bit Weld-on Hinge-pin-Excavator accessories Tipper Lock-Bus Door locks-Edge Capping Rear Door Hinge-Small Trailer Components & Grab Handles Roller Ball Bearing-Ratche Buckles-Van Parts Corner Castings-Van Parts-Truck Body & Container Equipment Vanparts Ratche Buckles-gull-wing van parts Lashing ring F_TRACK Forged Eye Bolt and Eye Nut Eye bolts ball joints Side Board Panel Hinge
Kenclaw Bits-Earth Auger & Parts
Kenclaw Bits
1. Cut a variety of formations from clay to medium shale rock. (Up to 6, 000 psi rock. )
2. Rapid penetration rates, cut as fast as drag bit, is as tough as a soft formation rock bit.
3. Average cutter life ranges from 500 ft to 2000 ft depending on formations encountered.
4. Suitable for air or fluid drilling.
5. Replaceable bullet cutter to save cost.
6. Available sizes from 3-3/4"(95mm) to 18"(457mm)
We can also produce the kenclaw bits by customers' special requirest.
1)certified by ISO9001&API
2)covers all IADC codes
3)size: 3 3/4" (95.3mm)~26" (660.4mm)
4)used for oil well and water well
12 1/4 " hjt117gc (311.15mm)
Design features of this bit
1. The diamond powder is selected in a higher degree.
2. Use a new type of tungsten carbide that different from previous cutters, it improved the strength character of bonding.
3. The claws of the interface are changed to be net-grooves-shaped which formed by 10-20 straight vertical grooves, and the depth of the grooves are shallower.
4. Improved the interior structure of the sintering cell that makes the pressure and temperature to be more uniform. It is very important for the PDC sintering.
5. Use new super heat-resistant metal, to avoid being contaminative during sintering.
6. Amended the sintering processing, and improved the bonding strength of the diamond-diamond key among the diamond layer.
7. Increase the content of diamond, and increase the thickness of diamond layer up to 1.5-2.0mm. The result of plenty of tests and the performance in customers' practical drilling in the oil fields shown that the performance in heat resistance and impact resistance are improved evidently, and quite similar to the cutters made by the best world-class manufactures.
Standard sizes:
Model1919 1916191316131608131313080808
D(mm)19.0519.0519.0516.0016.0013.4413.448.20
H(mm)19.0016.3113.2013.208.0013.208.008.00
PDC layer(mm)2.0-2.22.0-2.22.0-2.21.8-2.01.8-2.01.5-1.81.5-1.81.5-1.8
Diamond chamfer0.3mm× 45°
Kentanium chamfer(mm)0.3mm× 45°
Center nozzle can avoid bit balling, eliminate fluid stagnant area at bottom hole, increase rising velocity of drilling cuttings, and improve rop, which is suitable for drilling formations from soft to middle soft with low compressive strength and high drillability.
Recommended operating parameters
Wob 90 ~ 280(kn)
Ideal wob range 150~220(kn)
Rotary speed 80 ~ 300 (rpm)
Ideal rotary speed range 110~250(rpm)
The above parameters are only for reference. Optimized parameters are determined by drilling process and lithology of formations on site.
Applicable formations
Very soft with low compressive strength and high drillability, such as shale, clay, sandstone and conglomerate, etc.
IADC
1-1-7
Bearing and seal
Metal face sealed journal bearing
Number of rows
3-2-2
Number of cutters
64
Main cutter shape / Cutter exposure
Hardfaced tooth surface
Gage row cutter shape
Layout of diamond enhanced inserts
/
Type of nozzle
S4
Type of center nozzle
Yes
Shank
6 5/8 REG
Recommended makeup torque
37.9~43.3 (KN. M)
Specially designed leaves for welding installation. All come with a bushing between the two leaves.
The weld on hinge can also be customized to meet your unique specifications.
CNC machining
Machining size up to 800X600X400mm
Processing Scope
CNC turning, milling, drilling and punching
Products
Description
1. CNC turning, milling, drilling, tapping processing, CNC precision machining service
2. Material: Carbon steel, Steel alloy, stainless steel, aluminum, brass, bronze, plastic (PVC, POM etc. )
3. Surface treatment: Zinc plated, chrome/nickel plated, phosphating, heat treatment etc
4. Leading time: 10-35 working days depending on order quantity.
5. The products showing here are only for reference not for sale.
Inspection
All our intermediate manufacturing processes are routinely inspected by qualified QA Operators. All dimensional aspects of the finished part are checked for conformance.
Advantage
1. Our company is specializing in supplying OEM machining service in accordance with customers' drawing and requirement with low price but good quality and service.
2. Drawing Software: Solidworks, Pro/E, AutoCAD CAM |
Audited Supplier 
){kind=link}
){kind=link}