Steel Tooth Tricone Bits- Steel Bits

Product Details
Condition: New
Certification: CE, ISO9001
Standard: DIN
Still deciding? Get samples of US$ 0.9/Piece
Request Sample
Manufacturer/Factory, Trading Company, Group Corporation
Gold Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 RMB
Plant Area
101~500 square meters
  • Steel Tooth Tricone Bits- Steel Bits
  • Steel Tooth Tricone Bits- Steel Bits
  • Steel Tooth Tricone Bits- Steel Bits
  • Steel Tooth Tricone Bits- Steel Bits
  • Steel Tooth Tricone Bits- Steel Bits
  • Steel Tooth Tricone Bits- Steel Bits
Find Similar Products

Basic Info.

Model NO.
HS-STP-001
Customized
Non-Customized
Material
Alloy
Application
Metal Recycling Machine
Certificate
ISO9001 Ts16949
Trade Methods
FOB
Delivery Time
30 Days
No. of Employess
120
Payments Methods
L/C, T/T
Company Location
Ningbo
Transport Package
Wooden Case
Specification
SGS
Trademark
HS
Origin
Ningbo China
HS Code
84314990
Production Capacity
20000 Ton Per Year

Product Description

Product Name:

Single Roller Cone Bit Weld-on Hinge-pin-Excavator accessories Tipper Lock-Bus Door locks-Edge Capping Rear Door Hinge-Small Trailer Components & Grab Handles Roller Ball Bearing-Ratche Buckles-Van Parts Corner Castings-Van Parts-Truck Body & Container Equipment Vanparts Ratche Buckles-gull-wing van parts Lashing ring F_TRACK Forged Eye Bolt and Eye Nut Eye bolts ball joints Side Board Panel HingeSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel BitsSteel Tooth Tricone Bits- Steel Bits

Kenclaw Bits
1. Cut a variety of formations from clay to medium shale rock. (Up to 6, 000 psi rock. )
2. Rapid penetration rates, cut as fast as drag bit, is as tough as a soft formation rock bit.
3. Average cutter life ranges from 500 ft to 2000 ft depending on formations encountered.
4. Suitable for air or fluid drilling.
5. Replaceable bullet cutter to save cost.
6. Available sizes from 3-3/4"(95mm) to 18"(457mm)
We can also produce the kenclaw bits by customers' special requirest.

1)certified by ISO9001&API
2)covers all IADC codes
3)size: 3 3/4" (95.3mm)~26" (660.4mm)
4)used for oil well and water well

12 1/4 " hjt117gc (311.15mm)
Design features of this bit

1) metal face sealed journal bearing

Hj series bit uses journal bearing and metal face seal; It can perform consistently in high speed drilling application.

2) special gage protection on cone

A row of trimmers is added between heel row and gage row compacts. As a result, not only cone shell is protected, but also the borehole wall is properly trimmed.

3) head od reinforcement

Head od are designed with carbide inserts to protect the shirttail and seal to effectively improve the bit's ability to prevent diameter shrinkage.

4) hardfacing on shirttail

This feature can provide better protection for seal and bearing to extend the bit's service life.

5) center nozzle

Center nozzle can avoid bit balling, eliminate fluid stagnant area at bottom hole, increase rising velocity of drilling cuttings, and improve rop, which is suitable for drilling formations from soft to middle soft with low compressive strength and high drillability.

Recommended operating parameters

Wob 90 ~ 280(kn)

Ideal wob range 150~220(kn)

Rotary speed 80 ~ 300 (rpm)

Ideal rotary speed range 110~250(rpm)

The above parameters are only for reference. Optimized parameters are determined by drilling process and lithology of formations on site.

Applicable formations

Very soft with low compressive strength and high drillability, such as shale, clay, sandstone and conglomerate, etc.

IADC
1-1-7

Bearing and seal
Metal face sealed journal bearing

Number of rows
3-2-2

Number of cutters
64

Main cutter shape / Cutter exposure
Hardfaced tooth surface

Gage row cutter shape

Layout of diamond enhanced inserts
/

Type of nozzle
S4

Type of center nozzle
Yes

Shank
6 5/8 REG

Recommended makeup torque
37.9~43.3 (KN. M)
Specially designed leaves for welding installation. All come with a bushing between the two leaves.
The weld on hinge can also be customized to meet your unique specifications.
CNC machining
Machining size up to 800X600X400mm
Processing Scope
CNC turning, milling, drilling and punching
 
 
Products
Description
1. CNC turning, milling, drilling, tapping processing, CNC precision machining service
2. Material: Carbon steel, Steel alloy, stainless steel, aluminum, brass, bronze, plastic (PVC, POM etc. )
3. Surface treatment: Zinc plated, chrome/nickel plated, phosphating, heat treatment etc   
4. Leading time: 10-35 working days depending on order quantity.
5. The products showing here are only for reference not for sale.  
 
Inspection
All our intermediate manufacturing processes are routinely inspected by qualified QA Operators. All dimensional aspects of the finished part are checked for conformance.
 
 
Advantage
1. Our company is specializing in supplying OEM machining service in accordance with customers' drawing and requirement with low price but good quality and service.
2. Drawing Software: Solidworks, Pro/E, AutoCAD CAM

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier